There are many different rain gutter types and sizes out on the market. Our 5-1/4-inch Seamless Fascia Gutter is the most common style of rain gutter we install. It's also in the middle range of gutter sizes. This type of gutter-style will work with or without fascia boards installed. It actually acts as a fascia board as it is deep enough to cover the ends of the rafter tails. A lot of track homes built on the west coast were constructed without fascia boards. Fascia Gutters replaced the need for fascia boards while keeping a modern look curb appeal.
Fascia Gutters
5-1/4-inch Fascia Gutters
Our 5-1/4-inch Fascia Gutter is the most common style of rain gutters. It's also in the middle range of gutter sizes. This type of gutter-style will work with or without fascia boards installed. It actually acts as a fascia board. The standard size for California.
- Materials: Aluminum, Steel, Galv, Bond, and Copper
- Water Volume:2 Gal. per ft
- Max Roof Size:3200 sq ft, per gutter run
- Seamless: All materials except Bonderized
7-1/4-inch Fascia Gutters
This is a large residential and commercial seamless fascia gutter that is made to fit on the job site. They are made from steel with a pre-painted baked on enamel finish offered in 15 different colors. These gutters you will find in larger steep homes with 2 x 6 rafter tails. Also, on homes with wood shake or tile roofs. They have a large area to accept a high volume of water coming from the roof. Not Available in Aluminum.
- Materials:Steel, Galv, Bond, and Copper
- Water Volume: 2-1/3 Gal. per ft
- Max Roof Size: 3850 sq ft, per gutter run
- Seamless: All materials except Bonderized
7-inch Tile Fascia Gutters
This is a large residential and commercial seamless fascia gutter that is made to fit on the job site. They are made from steel with a pre-painted baked on enamel finish offered in 15 different colors. These gutters are used when a thick high tile roof is installed such as "S" Spanish tile. The 7-inch face with 5-inch back keeps the face of the gutter high so water doesn't overshoot the gutter. Only problem is if the downspouts become clogged the water will run up the roof instead of over the face of the gutter. A foam gutter guard should be used to prevent the gutters from being clogged. Not Available in Aluminum.
- Materials:Steel, Galv, Bond, and Copper
- Water Volume: 2 Gal. per ft
- Max Roof Size: 3100 sq ft, per gutter run
- Seamless: All materials except Bonderized
OGee Gutters
5-inch OGee Gutters
5-inch Ogee gutter is the most common. 5-inch Ogee Gutter is a lot smaller than 5 1/4" Fascia gutter even though they are both called 5-inch gutters. Fascia is measured by the depth of the gutter while Ogee is measured from the width of the gutter. Ogee gutters should only be installed over fascia boards. The gutter itself is not deep enough to cover the bottoms of the rafter tails.
- Materials:Aluminum, Steel, Galv, Bond, and Copper
- Water Volume: 1.0 Gal. per ft
- Max Roof Size: 2080 sq ft, per gutter run
- Seamless: All materials except Bonderized
6-inch OGee Gutters
6-inch Ogee gutters are big enough to handle the same load as a fascia gutter. They can hold almost twice the volume as the 5-inch Ogee. Ogee is more of your vintage roman ogee style or Victorian style with the fancy curves. Ogee gutters should only be installed over fascia boards, as the gutter itself is not deep enough to cover the bottoms of the rafter tails.
- Materials: Aluminum, Steel, Galv, Bond, and Copper
- Water Volume:2 Gal. per ft
- Max Roof Size:3180 sq ft, per gutter run
- Seamless: All materials except Bonderized
Half Round Gutters
5 inch Half Round Gutters
Half Round Gutters come in many different sizes but 5-inch and 6-inch are the most common. Half Round is most popular using copper materials. These gutters add a big curb appeal to the house. Offering a higher standard above the rest. These gutters will last 40+ years. They offer many decorative accessories to go along with them, including copper leader-heads/scuppers, downspout chains and much more. The accessories alone can almost double the entire gutter job price.
- Materials: Aluminum, Steel, Galv, Bond, and Copper
- Water Volume:1/2 Gal. per ft
- Max Roof Size:1070 sq ft, per gutter run
- Seamless: Yes, but hard to find
6 inch Half Round Gutters
Half Round Gutters come in many different sizes but 5-inch and 6-inch are the most common. Half Round is most popular using copper materials. These gutters add a big curb appeal to the house, to a higher standard above the rest. These gutters will last 40+ years. They offer many decorative accessories to go along with them, including copper leader-heads/scuppers, downspout chains and much more. The accessories alone can almost double the entire gutter job price.
- Materials: Aluminum, Steel, Galv, Bond, and Copper
- Water Volume:3/4 Gal. per ft
- Max Roof Size:1450 sq ft, per gutter run
- Seamless: Yes, but hard to find
Box Gutters
Box Gutters
Box Gutters come in many different sizes but 5-inch and 6-inch are the most common. These gutters are mainly used in Commercial applications, metal buildings, or barns. They can move a lot of water and normally have a large 3 x 4 downspout for drainage.
- Materials: Aluminum, Steel, Galv, Bond, and Copper
- Water Volume:2 Gal. per ft
- Max Roof Size: 3170 sq ft, per gutter run
- Seamless: Yes, but hard to find
